Friday, September 11, 2015

The hazards of uranium and plutonium

In my most recent issue of the Journal of Chemical Health and Safety, a fascinating article by Los Alamos National Laboratory authors Michael E. Cournoyer, Stephen A. Costigan and Bradley S. Schake entitled "Why is weapons grade plutonium more hazardous to work with than highly enriched uranium?" [1] For those of you (like myself) who do not work with actinides, this was fascinating reading (emphasis mine): 
The long-term storage of uranium ingots can form a pyrophoric surface caused by reaction with air and moisture. This is due to the formation of powdered hydride and hydrogen... In many reported incidents, flashing of the fuel or explosions occurred when the containers were opened. The flashing was believed to be the spontaneous ignition of uranium or uranium hydride which became suspended due to the mechanical disturbance of opening the container. 
These hazards are more severe with plutonium. In addition, plutonium expands up to 70% in volume as it oxidizes and thus may burst its container. Case studies show that mechanical wedging resulting from this expansion can even breach a second metal container, resulting in localized contamination release and possible exposure of personnel.
Chemist [picks up phone]: Hello?
Safety officer: Do you have any plutonium in a can?
Chemist: Uh, yes?
Safety officer: Well, you might want to let it out!

Also, this interesting section:
"The spontaneous ignition of uranium can usually be avoided by storage under dry (without moisture) oil. Plutonium stored under oil has been reported to spontaneously ignite. Plutonium should be stored as pure metal (Pu) or in its PuO2 form in a dry, inert or slightly oxidizing atmosphere... 
...For plutonium metal, complete exclusion of oxygen and./or rapid heat removal are the effective ways to extinguish fires. Sand can also be used to smother plutonium fires. Magnesium oxide sand is probably the most effective material for extinguishing a plutonium fire. Magnesium oxide cools the burning material, acting as a heat sink, and also blocks off oxygen. Because of reactivity and criticality concerns, water may not be the appropriate extinguishing agent." 
Just in case, you know, you had some plutonium lying around...

1. Cournoyer, M.E.; Costigan, S.A.; Schake, B.S. "Why is weapons grade plutonium more hazardous to work with than highly enriched uranium?" J. Chem. Health. Saf. 2015, 22 (4), 2-9. DOI: 10.1016/j.jchas.2014.10.004

6 comments:

  1. And if you really want an unholy mess, try machining some plutonium metal. See also, the Rocky Flats Horror Show.

    ReplyDelete
    Replies
    1. If I remember the story correctly, they actually burned couple METRIC TONS of weapons-grade Pu on Mother's day in 1969, in a combined magnesium metal + plutonium metal + acrylic plastic fire, with Denver few miles downwind...

      Delete
  2. CJ-Can Plutonium be stored under Nitrogen or inert gases? May be a combo of Magnesium oxide and inert gas.

    ReplyDelete
    Replies
    1. Why are you asking?

      Your friends at Homeland Security

      Delete
  3. Uranium is fun - of the wholly wrong kind. If you have forgotten the Gulf War footage take a look at the massive fireworks from depleted U shells striking Iraqi tanks.
    U reacts violently with a lot of stuff including CCl4 from old fire extinguishers. Take a look at the U entry in CAMEO.
    The first remarkable U fire was probably the Leipzig L-IV reactor fire on June 23, 1942. Apparently the firefighters had never seen a fire burning with such intensity. Little they knew...

    ReplyDelete
  4. We need to get Phil Baran on this project. Within months we will all be doing plutonium mediated coupling reactions on scale along side uranium hydride reductions.

    ReplyDelete

looks like Blogger doesn't work with anonymous comments from Chrome browsers at the moment - works in Microsoft Edge, or from Chrome with a Blogger account - sorry! CJ 3/21/20